not configurednot configured

We do Tenant Improvements! Contact us with your project.

LE-300 Marine Wind Turbine Standard Kit 12/24V

$1,652.04

The marine version of the LE-300 is fully marinised and designed for use in salt-water environments and on boats / yachts. Among other modifications, the LE-300 marine has a stainless steel counterweight fitted to the tail to reduce the effects of ‘pitch and yaw’ on turbine performance.

 

Clear
SKU: GA-LETKIT300A Categories: ,

Description

Perfect for a wind only system or basic hybrid system on your yacht or sailing boat, this LE-300 Marine Wind Turbine Standard Kit contains everything you need (except batteries & cables) to get up and running as quickly as possible.  Based on our most popular wind turbine, the LE-300 Marine from Leading Edge, it also includes the DL-300 diversion charge controller and a stop/start switch to be used when you want to stop the turbine for maintenance (not to be used in high winds).

The marine version of the LE-300 is fully marinised and designed for use in salt-water environments and on boats / yachts. Among other modifications, the LE-300 marine has a stainless steel counterweight fitted to the tail to reduce the effects of ‘pitch and yaw’ on turbine performance.

The wind turbine is connected directly to the batteries and the DL-300 charge controller is also connected to the batteries. When the batteries are fully charged, the controller diverts excess power generated by the wind turbine into the DL-300’s resistor, dissipating the power as heat.

Mount the turbine on a standard scaffold pole (48-50mm outer diameter).  We recommend the Marine Wind Turbine Tower (2.8m). The main mast is made in two parts and is 50mm in diameter. The base swivels and tilts so it can easily be fitted onto angled decks or sloping transoms. The bottom of each of the two 1.5m struts in the kit can be clamped onto the push pit rail and additional fittings are available for mounting directly to the deck if preferred. Each strut is fully adjustable and can be positioned at any point or angle on the main mast section, before being clamped into position thus allowing a huge flexibility of mounting options. To add additional strength to the tower, we also include an additional pulpit clamp for the struts.

Additional information

Volatge

12 V, 24 V

KIT INCLUDES

GA-LETU-017C LE-300 Marine Turbine (12V / 24V)
GA-CTRL-001A DL-300 Charge Controller (12V / 24V)
GA-CTRL-008A Run / Stop Switch

Reviews

There are no reviews yet.

Be the first to review “LE-300 Marine Wind Turbine Standard Kit 12/24V”

Your email address will not be published. Required fields are marked *